Name: Magellan 2200VS
Brand: Magellan
Rating: 4 (1 reviews)

To Next Page

To Previous Page

5-178 Magellan

2200VS/2200VS and 2300HS/2300HS

Keyboard Interface — Intercharacter Delay

Sets the delay between the end of one character and the beginning of the

next, in 10 millisecond increments.

To specify the intercharacter delay:

1. Scan the SWITCH bar code.

2. Scan the bar code below,

SET KEYBOARD WEDGE INTERCHAR-

ACTER DELAY

. You’ll need to cover any unused bar codes on this

and the facing page to ensure that the scanner reads only the bar

code you intend to scan.

3. Scan the appropriate digits from the keypad in

Appendix C that rep-

resent the desired delay. The selectable range is 0-100, which is the

delay in 10-millisecond increments. Pad all single and double digit

numbers with leading zeroes to yield a three-digit entry (000-100).

Examples:

001 = 10ms

005 = 50ms

040 = 400ms

100 = 1,000ms (1 second)

4. The scanner will automatically exit Programming Mode when the

appropriate amount of digits have been scanned.

SET KEYBOARD WEDGE INTERCHARACTER DELAY

Questions and Answers:

Need help?

Do you have a question about the Magellan 2200VS and is the answer not in the manual?

Magellan 2200VS Specifications

General