IMPULSE•T Instruction Manual - October 2015
2-4
IMPULSE•T System Components And External Devices
Optional Drive Components
• 120 VAC Interface Card (Part Number T-IF-120VAC)
• 24 VAC Interface Card (Part Number T-IF-24VAC)
• 48 VAC Interface Card (Part Number T-IF-48VAC)
• Quick Start Guide (Part Number 144-25086)
As-Required Drive Components
• AC reactor—line or load
• DC bus reactor
• External dynamic braking resistor(s)
Required External Devices
• Motor
• User input device (pendant, joystick, PC, PLC, radio, or infrared control)
• External circuit protection devices (fuses or circuit breakers). See “Suggested Circuit
Protection Specifications and Wire Size” on page 3-7.
• R-C surge suppressors on contactor coils
To Next Page
Loading...