IMPULSE•T Instruction Manual – October 2015
5-18
L1-02 Motor Overload Time
Const
Time for OL1 fault when motor
current is 150% of the motor
rated current. Hot start
0.1–5.0 min 1.0 Adv
Figure 5-6: Motor Protection Operation Time
L1-13 Overload Operation
Selection
Determines whether or not to
hold the Electrothermal value
when power is interrupted
00–01 01 Adv
00 Disable
01 Enable
Parameter
Code
Name Function Range
Initial
Value
Access
Level
To Next Page
Loading...