10
SAFETY INSTRUCTIONS
• Verify that every people is in a safe place before putting into operation the engine of the tractor and
the PTO.
• The operator at the tractor never have to abandon the driving place when the machine is working,
and must stop the PTO in view of any unexpected situation.
• Close the valve of the hydraulic cylinder before carrying out any type of work or maintenance at the
Bagger.
• Keep the bagger clean when not in use. Doing this you decrease the risk of deterioration.
• Take a re extinguisher with the Bagger as a caution or safety measure.
• Maintain in good condition de safety, precaution and indication stickers. If damaged replace by new.
• Do not control leaks of the brake or hydraulic circuit with the bare hands, they can have enough pressure
for causing damage in your skin.
• Utilize protection face mask (nose and mouth), when working with the Bagger.
• Most of the accidents are caused for human error. Respect all the safety recommendations.
• Circulate cautiously, when transporting the bagger by public routes.
• Maintain the hands, feet and clothes away from moving parts.
• If you have questions that are not answered in this manual, need additional copies or if the manual was
damaged, please contact your MAINERO dealer, or call:
MAINERO CUSTOMER SERVICE
Tel.: +54+0800-444-0999
E-mail : servicio@mainero.com.ar.
MR. OPERATOR:
• All reference left or right is considered watching the machine working from the BACK and in sense of
ADVANCE.
• You must use your Bagger as a practical equipment which allows you to obtain the maximum performan-
ce and durability.
• Locate the Operator´s Manual at the own place the machine is operating.
• Before coupling the Bagger to the Tractor, we recommend to read carefully Operator´s Manual.
• Understand all the information that is contained in it, it is specically referred to the functioning, adjust-
ment, maintenance, etc. of the Bagger.
• The Bagger is an agricultural machine and therefore debit side to be transported by public roads on
truck, dray, etc.
• If you decide to transport it towed it veries before :
1. That the pin of the coupling has the safe clip installed.
2. That the machine is totally raised, the valve of the hydraulic cylinder is in closed position and the
hoses are without pressure.
3. Install standardized lighting elements.
4. Tighten of wheels bolts.
5. Install safety chains between tongue and tractor (nor provided).
6. The tires pressure.
To Next Page
Loading...