42
Mr. Operator: “WHAT YOU MUST NOT DO”
• Work with the tractor out of standard regarding its draw bar, PTO, etc.
• Work with a PTO reime higher to 540 RPM.
• Forget to do the correct maintenance, lubrication, etc, plan.
• Make bags with excessive compacting pressure.
• Transport the machine with others elemntes hitched to it.
• Transport the machine with cereal on the grain hopper.
• Transport the machine without verify hitch fastener and safe, without connecting the light system and
verifying the right operation.
• Left the grain hopper lled from one day to the next.
• Start a new bag without accomplishing properly the clousure initial operation.
• Μake the bags without the proper separation between them.
• Operate the machine without knowing its function.
• Not use the correct working height.
• Working without taking out the wheel hub from inside the tunnel or not placing the basket in the right
position.
• Transport the machine by public roads in working position.
FINAL DEPOSITION
Once the product arrived at the end of its useful life, each one on its behalves should be given the corres-
ponding treatment, avoiding to contaminate the oor, the water, or in the air.
• Therefore the addressee has the obligation of making the operation of conformity with the effective nor-
ms in the country in which the machine is used.
• The metallic components can be fused again and reutilizados.
• The plastic components, rubber, oils, etc. should be given the appropriate treatment to the effective,
national and provincial legal dispositions, etc.
To Next Page
Loading...