mainero 2240 - Spare Parts Listing of Illustration N° 1

46
2240
47
SPARE PARTS LISTING OF THE ILLUSTRATION Nº 1
POS. DENOMINATION SPARE Nº POS. DENOMINATION SPARE Nº
1 Hitch simple 41740-211
Hitch double 41740-217
2 Hex bolt RM 18 x 40 mm 21705-516
3 Clip pin Ø 3,5 x 65 mm 22300-102
4 Tongue lock pin 43940-214
5 Tongue pivot pin – zinc plated 43940-600
6 Cotter pin Ø 5 x 40 mm 25102-210
7 RH Stand 43900-224
8 Auger support tower 43900-238
9 Chassis 43900-293
10 Hex bolt RM 16 x 40 mm 21705-480
11 Self lock hex nut RM 16 mm 27963-110
12 Flange 43100-685
13 Straight grease nipple 1/8” 24902-101
14 Pressure washer Ø 16 mm 20814-112
15 Side stand adjuster pin 43900-633
16 RH treat adjuster 47538-274
17 Hex nut 7/8” 27901-108
18 Stand adjuster 43900-228
19 LH treat adjuster 47538-273
20 Cotter pin Ø 4 x 30 mm 25102-188
21 Side stand lock pin 43900-634
22 Adjuster support 43900-226
23 Side stand 43900-225
24 LH side stand 43900-223
25 Transport tongue lock ping 43940-213
26 Accessories box 43929-610
27 Self lock hex nut RM 8 mm 27963-106
28 Hex bolt RM 8 x 16 mm 21705-337
29 Working tongue 43940-212
30 Self lock hex nut RM 18 mm 27963-111
31 Hex bolt RM 8 x 30 mm 21705-343
32 PTO shaft support 43940-215
33 Nonskid Tape (L: 350 mm) 43900-933
34 Nonskid Tape (L: 100 mm) 43900-935
35 Hex nut RM 12 mm 27963-108
36 Plain washer Ø 1/2” 20801-106
37 Hex bolt RM 12 x 35 mm 21705-408
38 Self lock nut RM 10 mm 27963-107
39 Brake bomb supports base 43901-213
40 Middle ange 43900-648
41 Hex bolt RM 10 x 35 mm 21705-375
42 Lock pin 43925-204
43 Hex bolt RM 6 x 20 mm 21705-282
44 Cover 43900-650
45 Self lock hex nut RM 6 mm 27963-104
46 Self lock hex nut RM 24 mm 27963-114
47 Tongue lock ping prolongation 43940-221
48 Right tongue elevator accesory 43940-222
49 Nut RM 20 x 2,5 mm 27935-118
50 Bolt for butt tongue 21706-561
51 Working tongue pivot pin 43940-601
52 Transport tongue lock ping 43940-220
53 Left tongue elevator accesory 43940-219
54 Hex bolt. RM 24 x 110 mm 21705-631
55 Plain washer galv. Ø 5/16” 20801-103