Makita JR3051T Repair Manual

22 / 32
Fig.48
4 Remove Pan head screws M5x16 [1] (4 pcs), then
remove the following parts:
 Gear plate A [2]
 Gear plate [3]
 Gear complete [4]
Fig.49
5 Remove Armature [2] from Gear housing [1] with a
slotted screwdriver.
Fig.50
6 Remove Flat washer 18 [2] and Needle bearing 708
[3] from Gear complete [1].
[3]
[1]
[2]
[2]
[1]
[1]
[4]
[3]
[2]

Makita JR3051T Specifications

General

Power Source	Corded
Amperage	12 A
Strokes Per Minute	0-3, 000 SPM
Tool Weight	7.3 lbs
Voltage	120 V
Tool Length	17-3/4 inches
Max. Cutting Capacity in Wood	10 inches
Max. Cutting Capacity in Steel Pipe	5-1/8 inches