Manitou MAN'GO 12 User Manual

5 - LOW-TEMPERATURE ENGINE START-UP AID
This selector switch has two positions to be selected according to the ambient air
temperature.
1 : SUN POSITION
- If the temperature is over - 10°C, start the engine at tickover rpm.
2 : SNOW POSITION
- If the temperature is less than around - 10°C, set the selector switch to this position
before starting: the engine will be held at maximum rpm (only for the first start
of the day).
- Leave the engine at maximum rpm for 30 to 60 seconds, depending on the
temperature (no movement is possible during this time).
- Switch the selector switch from SNOW to SUN position and the rpm drop to tickover
level (normal position, warm engine).
6 - INTERFACE SCREEN
This screen lets you display all stages of start-up and parameters and access certain
menus such as :
• Maintenance display,
• Machine maintenance,
• Faults display,
• Faults history,
• Hour metres: internal-combustion engine meter, certain usage time sub-meters,
daily usage meter, function activation meter (manufacturer access only).
NOTE:
The current system time is displayed at the top of each page. The serial number of
the machine is displayed at the bottom of each page.
7 - INFORMATION VALIDATION SCREEN KEYS
These keys enable you to validate the different information on the screens.
FUNCTIONS OF THE KEYBOARD KEYS:
7A : Selection keys for the proposals on the menu pages.
7B : Selection keys for the proposals on the sub-menu pages.
7C : This “Confirm / OK” key has two functions:
• “Confirmation” key for the selections made by the plus / minus keys,
• Fault acknowledgement key (the fault has been seen; this key enables you to
get rid of the screen without necessarily resolving the problem).
7D : This “Menu” key has two functions:
• It enables you to open the “Access Menu” page.
• Enter the code to get the desired menu (this code will be memorised for as long
as the lifting platform is receiving power).
• It enables you to exit and return to the work screen page.
7E : The “Exit” key has two functions:
• It cancels a validation in progress.
• It enables you to return to the previous level in a menu.
7F : The “Fault” key displays any faults present on the lifting platform when the fault
triangle appears.
START
ENGINE
5
7A
7B
7C
7D
7E
7F
START
ENGINE
5
2 - 29
647533 (09/10/2015) MAN'GO 12

Manitou MAN'GO 12 Specifications

General

Brand	Manitou
Model	MAN'GO 12
Category	Boom Lifts
Language	English