EasyManuals Logo
Home>Manitou>Boom Lifts>MAN'GO 12

Manitou MAN'GO 12 User Manual

Manitou MAN'GO 12
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
1 - 14
PLATFORM MAINTENANCE INSTRUCTIONS
GENERAL INSTRUCTIONS
- Ensure the area is sufficiently ventilated before starting the platform.
- Wear clothes suitable for the maintenance of the platform, avoid wearing jewellery and loose clothes. Tie and protect
your hair, if necessary.
- Stop the I.C. engine before conducting any work on the platform, remove the ignition key and disconnect the “Minus”
battery terminal.
- Set the battery cut-out to the OFF position (ELECTRIC PLATFORM).
- Read the operators manual carefully.
- Carry out all repairs immediately, even if the repairs concerned are minor.
- Repair all leaks immediately, even if the leak concerned is minor.
- Make sure that the disposal of process materials and of spare parts is carried out in total safety and in a ecological way.
- Be careful of the risk of burning and splashing (exhaust, radiator, I.C. engine, etc.).
MAINTENANCE
- Perform the periodic service (see : 3 - MAINTENANCE) to keep your platform in good working conditions. Failure to
perform the periodic service may cancel the contractual guarantee.
MAINTENANCE LOG
- The maintenance work performed following the recommendations in Part 3 - MAINTENANCE and the other inspection,
servicing, repair and modification work performed on the lifting platform must be recorded in a maintenance log. A note
must be made, for each operation, of the date of the work, the names of the persons or companies that have performed
them, the nature of the ’operation and, where applicable, the maintenance intervals. When components in the lifting
platform have to be replaced, the components references must be noted.
LUBRICANT AND FUEL LEVELS
- Use the recommended lubricants (never use contaminated lubricants).
- Do not fill the fuel tank when the I.C. engine is running.
- Only fill up the fuel tank in areas specified for this purpose.
- Do not fill the fuel tank to the maximum level.
- Do not smoke or approach the platform with a flame, when the fuel tank is open or is being filled.
LEVEL OF ELECTROLYTE IN THE BATTERY
- Check the level of the battery or batteries.
t
IMPORTANT
t
When doing this, ensure you take all the safety precautions (See : 3 - MAINTENANCE).
HYDRAULIC
- Do not fill the fuel tank to the maximum level.
- Do not smoke or approach the platform with a flame, when the fuel tank is open or is being filled.
t
IMPORTANT
t
BALANCING VALVE : It is dangerous to change the setting and remove the balancing valves or safety valves which may be fitted to your platform cylinders. These
operations must only be performed by approved personnel (consult your dealer).
t
IMPORTANT
t
Ensure that all consumables and replacement parts are disposed of safety, in an environmentally friendly manner.
t
IMPORTANT
t
The HYDRAULIC ACCUMULATORS that can be fitted on your lifting platform are pressurised components; removal of these components and their hoses can be a dangerous
operation. It should only be performed by accredited personnel (please contact your dealer).
ELECTRICITY
- Do not drop metallic items on the battery (between the “Plus” and “Minus terminals”).
- Disconnect the battery or batteries before working on the electrical circuit.
- The electrical box must only be opened by authorized personnel.
647533 (09/10/2015)
MAN'GO 12

Table of Contents

Other manuals for Manitou MAN'GO 12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou MAN'GO 12 and is the answer not in the manual?

Manitou MAN'GO 12 Specifications

General IconGeneral
BrandManitou
ModelMAN'GO 12
CategoryBoom Lifts
LanguageEnglish

Related product manuals