To Next Page

To Previous Page

1 - 5

IMPORTANT

For operation under average climatic conditions, i.e. : between -15 °C and + 35 °C, correct levels of lubricants in all the circuits are checked in production. For operation

under more severe climatic conditions, before starting up, it is necessary to drain all the circuits, then ensure correct levels of lubricants using lubricants properly suited to

the relevant ambient temperatures. It is the same for the cooling liquid.

- A platform operating in an area without fire extinguishing equipment must be equipped with an individual extinguisher.

There are solutions, consult your dealer.

IMPORTANT

Your platform is designed for outdoor use (see chapter: 2 - DESCRIPTION, CHARACTERISTICS pages) under normal atmospheric conditions and indoor use in suitably

aerated and ventilated premises. It is prohibited to use the platform in areas where there is a risk of fire or which are potentially explosive (e.g. Refineries, fuel or gas

depots, stores of inflammable products…). For use in these areas, specific equipment is available (ask your dealer for information).

Modifying the platform

- For your safety and that of others, you must not change the structure and settings of the various components used in your

platform (hydraulic pressure, calibrating limiters, I.C. engine speed, addition of extra equipment, addition of counterweight,

unapproved attachments, alarm systems, etc.) yourself. In this event, the manufacturer cannot be held responsible.

- Your lifting platform is delivered with standard wheels or all-terrain wheels. It is FORBIDDEN to switch from one type of

wheels to another: RISK OF THE LIFTING PLATFORM BECOMING UNSTABLE.

THE INSTRUCTIONS

- The operator’s manual must always be in good condition and kept in the place provided on the platform and in the

language used by the operator.

- You must necessarily replace the instructions manual, as well as any plates or stickers, if they are no longer legible or are

missing or damaged.

THE MAINTENANCE

- Maintenance or repairs other than those detailed in the chapter 3 - MAINTENANCE must be carried out by qualified

personnel (consult your dealer) and under the necessary safety conditions to maintain the health of the operator and

any third party.

IMPORTANT

Your patform must be inspected periodically to ensure that it remains in compliance. The frequency of this inspection is defined by current legislation in the country in

which the platform is use

- Example for France : The manager of the compagny using the platform must set up a maintenance book for each machine

and keep up-to-date (Ministerial Order of 2nd March 2004).

647533 (09/10/2015)

MAN'GO 12