Manitou TMT 25 I K ST5 S1 User Manual

ACTIVATING STATIONARY MACHINE REGENERATION

IMPORTANT

Use of the machine over very short periods (e.g. 5min) escalates clogging of the particulate filter.
Stationary machine regeneration will be requested frequently.
These stationary machine regenerations must be carried out to maintain the machine in good working order.
In this case, reduce the engine oil replacement interval (Consult your dealer).
PARTICULATE FILTER REGENERATION STATUS AND MANAGEMENT
SIGNALS ACTIONS
Normal soot level
• Idling speed increases, indicating that automatic regeneration is in progress.
- The indicator lamp
may come on.
NOTE: Wait for automatic regeneration to finish before turning off the ignition.
*
Moderate soot level
• Activate stationary machine regeneration
(3-MAINTENANCE: OCCASIONAL OPERATION).
- The indicator lamp
comes on.
- The indicator lamp
may come on.
Use the dashboard
handset
+ **
High soot level
• Machine efficiency is reduced.
• Quickly activate stationary machine regeneration.
(3-MAINTENANCE: OCCASIONAL OPERATION).
• The indicator lamp
comes on.
- The indicator lamp
may come on.
+
Very high soot level
• Machine efficiency is reduced.

IMPORTANT

Stop the machine and contact your dealer.
+
Particulate filter clogged
• Machine efficiency is reduced.
• The particle filter must be replaced.

IMPORTANT

Stop the machine and contact your dealer.
(*) slow flashing
(**) rapid flashing
POLLUTION CONTROL SYSTEM FAULT
The indicator lamp
flashes rapidly when an anomaly is detected on the polluting exhaust gases.

IMPORTANT

Stop the machine and contact your dealer.
EXHAUST GAS RECIRCULATION SYSTEM FAULT
The indicator lamp
flashes rapidly when an anomaly is detected on system operation.

IMPORTANT

Stop the machine and contact your dealer.
2 - 36
647866 M1 (A012021) TMT ... K ST5 S1

Manitou TMT 25 I K ST5 S1 Specifications

General

Brand	Manitou
Model	TMT 25 I K ST5 S1
Category	Forklifts
Language	English