Manitou TMT 25 I K ST5 S1 User Manual

DISABLING AUTOMATIC REGENERATION
NOTE: Particulate filter regeneration is automatic each time the machine is started.

IMPORTANT

Disabling of automatic regeneration remains a function that is only to be used in case of necessity (confined or unventilated space, etc.), if the particulate filter could be
damaged prematurely.
As soon as the conditions allow, reactivate automatic regeneration as quickly as possible.
- Press .
- Use
or to select , then press to confirm.
- Use or to select "Disable DPF Regeneration", then press to confirm.
- Select "ON" to deactivate regeneration of the particulate filter. The indicator lamp
comes on on the screen.
D-GENERAL OPERATION FAULTS
If a general operation fault is detected, the warning
and the origin of the fault appear on the screen.

IMPORTANT

Stop the machine and consult your dealer.
LIST OF FAULTS:
• Forward/reverse selector fault
• Engine alternator fault
• CAN communication fault
• Engine CAN communication fault
• Steering mode CAN communication fault
TMT ... 4W
• Engine ECU code fault
• Electric circuit power supply fault
• Fuel gage fault
• Longitudinal stability device fault
• Maintenance fault
NOTE: Some faults require validation by the operator, press on
.
2 - 37
647866 M1 (A012021) TMT ... K ST5 S1

Manitou TMT 25 I K ST5 S1 Specifications

General

Brand	Manitou
Model	TMT 25 I K ST5 S1
Category	Forklifts
Language	English