Marantz AV7701 - Page 83

83
Error
Code
Details of Error code Display Coping strategies
A6
Errornoticationreceivedwhile
requesting FirmwareInfo.
U p d a t i n g f a i l A 6
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "ON/
STANDBY (
X
)" buttonforveseconds.
A7 TimeOut while obtaining Firmware
U p d a t i n g f a i l A 7
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "ON/
STANDBY (
X
)" buttonforveseconds.
AE
Unable to detect USB for
FirmwareDownload.
C o n n e c t i o n F a i l A E
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "ON/
STANDBY (
X
)" buttonforveseconds.
AF
No FirmwareFile for
FirmwareDownload.
F i l e s N o t F o u n d A F
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "ON/
STANDBY (
X
)" buttonforveseconds.
B1
TimeOut in Download (writing to
SDRAM) for FirmwareDownload
D o w n l o a d f a i l B 1
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "ON/
STANDBY (
X
)" buttonforveseconds.
B2
Errornoticationreceivedafter
rewriting DM860A Firm.
U p d a t i n g f a i l B 2
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "ON/
STANDBY (
X
)" buttonforveseconds.
B3 Error in FirmwareUpdate (TimeOut).
U p d a t i n g f a i l B 3
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "ON/
STANDBY (
X
)" buttonforveseconds.
B4 Failed to transit to BootLoaderMode.
U p d a t i n g f a i l B 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "ON/
STANDBY (
X
)" buttonforveseconds.
B5 Failed to transit to ApplicationMode.
U p d a t i n g f a i l B 5
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "ON/
STANDBY (
X
)" buttonforveseconds.
--- Cautions on Firmware Update ---
When an error code as shown above appears in the DISPLAY, check the following:
• Check whether the Firmware downloaded to the USB memory is correct (whether the MODEL name and area of the
downloaded Firmware match those for the product, and whether the USB Memory contains data other than the latest
Firmware).
• Update after resetting the product.
• Use a different USB memory.