Marantz SR5006 User Manual

16
Connecting a wireless receiver (RX101)
By connecting a wireless receiver RX101 (sold separately) to this unit, you can receive and playback audio
signals from other devices using the Bluetooth Communication Function.
•Use a Bluetooth device that is A2DP compatible (vpage131 “A2DP”).
•You can also use wireless receiver RX101 as an external IR receiver.
•For instructions on the wireless receiver settings, refer to the RX101’s operating instructions.
Wireless receiver RX101
Remote control unit
Bluetooth device
(A2DP Compatibility)
You can enjoy listening to music by connecting a wireless receiver via the M-XPort input connector. In this
case, set the input source to “M-XPort”.
NOTE
To use wireless receiver RX101 as external IR receiver, set the remote sensor function of this unit to
disable (vpage111 “Remote control settings”).
Connect a device that has a multichannel output
terminal
•You can connect this unit to an external device fitted with multi-channel sound audio output jacks to enjoy
music and video.
•The video signal can be connected in the same way as a Blu-ray Disc player / DVD player (vpage11
“Connecting a Blu-ray Disc player”).
Cables used for connections
Audio cable (sold separately)
Audio cable
R
L
R
L
Audio cable
L
L
R
R
L
L
R
R
L
L
R
R
SUB-
WOOFER
CENTER SURROUND
BACK
RL
SURROUND
RL
FRONT
RL
AUDIO
Blu-ray Disc player / DVD player /
External decoder
To play analog signals input from 7.1CH IN connectors, set “Input Mode” (vpage109) to “7.1CH
IN”.
in Set as Necessary
When a device is connected to the SBL/SBR terminal of 7.1CH IN connectors, set “Amp Assign”
(vpage92) to “NORMAL”.
Basic version
Advanced version
Information
Basic version

Marantz SR5006 Specifications

General

Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (20-20KHz@8 Ohm)	100 W
Ethernet LAN (RJ-45) ports	1
Connectivity technology	Wired
Speakers connectivity type	RCA
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Wi-Fi	No
Ethernet LAN	Yes
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Preset stations quantity	56
Display	LED
Product color	Black
Audio decoders	DTS 96/24, DTS-ES, DTS-HD Master Audio
Apple docking compatibility	iPhone, iPod
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	650 W

Weight and Dimensions

Depth	389 mm
Width	440 mm
Height	161 mm
Weight	10600 g