To Next Page
M
martha86Sep 8, 2025
Why Dynamic EQ® and Dynamic Volume® cannot be selected on Marantz SR5006 Receiver?
- EErin SweeneySep 8, 2025
If you're unable to select Dynamic EQ® and Dynamic Volume® on your Marantz Receiver, try running Audyssey® Auto Setup.
Why Dynamic EQ® and Dynamic Volume® cannot be selected on Marantz SR5006 Receiver?
If you're unable to select Dynamic EQ® and Dynamic Volume® on your Marantz Receiver, try running Audyssey® Auto Setup.
What to do if Reception fails, or there is a lot of noise or distortion on Marantz Receiver?
If you're experiencing poor reception, noise, or distortion with your Marantz Receiver, try these steps: * Adjust the antenna's orientation or location. * Separate the AM loop antenna from the unit. * Consider using an FM outdoor antenna. * Keep the antenna away from other connection cables.
General| Audio output channels | 7.1 channels |
|---|---|
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Power output per channel (20-20KHz@8 Ohm) | 100 W |
| Ethernet LAN (RJ-45) ports | 1 |
| Connectivity technology | Wired |
| Speakers connectivity type | RCA |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Wi-Fi | No |
| Ethernet LAN | Yes |
| AM band range | 520 - 1710 kHz |
| FM band range | 87.5 - 107.9 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 56 |
| Display | LED |
| Product color | Black |
| Audio decoders | DTS 96/24, DTS-ES, DTS-HD Master Audio |
| Apple docking compatibility | iPhone, iPod |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 650 W |
Weight and Dimensions| Depth | 389 mm |
|---|---|
| Width | 440 mm |
| Height | 161 mm |
| Weight | 10600 g |
