Marantz SR7008 - Speaker Config

193
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Main Speakers
Selects speakers used in MAIN ZONE when “Assign Mode”
(vpage192) is set to “7.1ch + ZONE2”, “7.1ch(Bi-Amp)” or “7.1ch
+ Front B”.
S.Back/F.Height (Default) : Uses surround back and front height
speakers.
S.Back/F.Wide : Uses surround back and front wide speakers.
F.Height/F.Wide : Uses front height and front wide speakers.
Speaker Config.
Indicate speaker presence and select speaker size categories based on
bass reproduction capability.
2 Front
Set the front speaker size.
Large : Use a large speaker that can adequately play back very low
bass frequencies.
Small (Default) : Use a small speaker that has inadequate playback
capacity for very low bass frequencies.
%
•When “Subwoofer” is set to “None”, “Front” is automatically set to “Large”.
•When “Front” is set to “Small”, “Center”, “Surround“, “Surr. Back”, “Front
Height” and “Front Wide” can not be set to “Large”.
2 Center
Set the presence and size of the center speaker.
Large : Use a large speaker that can adequately play back very low
bass frequencies.
Small (Default) : Use a small speaker that has inadequate playback
capacity for very low bass frequencies.
None : Select when a center speaker is not connected.