Marantz SR7008 - Page 222

222
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Delete remote control codes for each input
source
1
Press and hold SET until the LEARN indicator blinks.
2
Press and hold POWER X and press the learned input
source select buttons to be erased twice.
“ERASE” is shown in the remote control display.
3
Press SET.
•The LEARN indicator turn o.
2 Delete remote control codes for all input
sources
1
Press and hold SET until the LEARN indicator blinks.
2
Press and hold POWER X and press AVR twice.
“ERASE” is shown in the remote control display.
3
Press SET.
•The LEARN indicator turn o.