Warning! Read the Safety and Installation Manual that is included at the end of this User
Manual, paying particular attention to the Safety Precautions section, before operating the
fixture.
The output of LEDs, like all light sources, changes gradually over many thousands of hours of use. If you
require products to perform to very precise color specifications, you may eventually need to make small
readjustments at the lighting controller.
Controlling via DMX
Once you have set up fixtures’ DMX modes and DMX addresses, you can control fixtures using the DMX
controller that is connected to the installation. See the ‘DMX protocols’ section at the end of this manual
for details of the control options available.
To Next Page
Loading...
