Martin
®
MAC One User Manual Rev. B 49
FX Macros
Beam Intensity FX
These FX modulate the intensity of the Beam LED while maintaining the color set by the RGB channels
and P3 pixels. The color selected on the Beam virtual color wheel is used as background color.
• For example, when the Beam virtual color wheel is set to 0 (open), the Beam 2x Strobe FX will strobe
normal color on a black background.
• For example, when the Beam virtual color wheel is set to Green, the Beam 2x Strobe FX will strobe
normal color on a green background.
Modifies pulse width of strobe patterns selected via
the Beam strobe/shutter channel
Flashes of Beam going dark
Bursts of two strobe flashes
Bursts of three strobe flashes
Bursts of four strobe flashes
Fading up, fading down and then flashing
Beam Up, Down, Flash Second Color
Fading up, fading down and then flashing in second
color selected via Beam virtual color wheel
Beam Up, Flash, Down, Flash
Fading up, flashing, fading down and then flashing
again
Beam Up, Flash, Down, Flash Second
Color
Fading up, flashing, fading down and then flashing
again in second color selected via Beam virtual color
wheel
Beam Color FX
These FX override the Beam color set by the RGB channels, virtual color wheel and P3 pixels.
Red-white-blue bump without crossfade
Red-white-blue bump with crossfade
Strobe of silver with hit of gold