MARTINDALE ET4500 - Page 78

Martindale ET4000 / ET4500 Technical specifications
78
EMC
Complies with ................................... BS EN 61326 – Class B (Hand-held equipment
used in controlled EM environments)
Specification for TL36 test leads
Maximum voltage .............................. 1000V AC/DC
Maximum current .............................. 10A continuous
Connectors ....................................... 4mm banana plugs with fixed shrouds
Environmental
Temperature (Operating & Storage) . 0°C - 40°C
Altitude .............................................. up to 2000m
Pollution degree ................................ 2
Safety
Complies with ................................... BS EN61010-031
Measurment category ....................... 600V CAT IV, 1000V CAT III, 10A (probe tip caps
fitted)
1000V CAT II, 10A (probe tip caps removed)
600V CAT IV, 1000V CAT III, 10A (crocodile clip
fitted)
Protection class ................................ Class II, double insulation
Specification for TL207 test lead
Maximum voltage .............................. 300V AC/DC (1000V DC for insulation tests)
Maximum current .............................. 10A continuous
Connectors ....................................... 4mm banana plugs with fixed shrouds to mains
plug
Environmental
Temperature (Operating & Storage) . 0°C - 40°C
Altitude .............................................. up to 2000m
Pollution degree ................................ 2
Safety
Complies with ................................... BS EN61010-031
Measurment category ....................... 300V CAT II, 10A
Protection class ................................ Class II, double insulation