Why is my Masimo SET Medical Equipment making a continuous speaker tone?
If your Masimo SET Medical Equipment is making a continuous speaker tone, it indicates an internal failure and the instrument requires service. Press the Alarm Silence button to silence the alarm. If the alarm continues to sound, power down the Instrument and remove the Handheld battery if necessary.
What causes unexpectedly high SpCO readings on Masimo SET Medical Equipment?
An unexpectedly high SpCO reading on the Masimo SET Medical Equipment can be caused by a possible elevated methemoglobin level. Submit a blood sample for laboratory CO-Oximetry test.
How to resolve difficulty or no SpO2/SPCO*/ SPMET* reading on Masimo SET Medical Equipment?
To resolve difficulty or no SpO2/SPCO*/ SPMET* reading on Masimo SET Medical Equipment, verify the docking station power cord is plugged in and the docking station power indicator light is illuminated. Verify/set the 50/60hz menu setting. Verify proper sensor and sensor size for the patient. Shield the sensor from excessive or strobing light.
How to resolve difficulty or no SpCO/SpMet reading on Masimo SET Medical Equipment?
To resolve difficulty or no SpCO/SpMet reading on Masimo SET Medical Equipment, minimize or eliminate motion at the monitoring site. Verify the use of an SpCO/SpMet capable sensor and the proper sensor size for the patient.
Covers contraindications and initial warnings/cautions for the Rad-57 device.
Details hazards like explosion, electric shock, light interference, and patient safety protocols.
Addresses handling, moisture, liquids, modifications, and environmental factors affecting the instrument.
Discusses EMI, FCC compliance, electrical shock prevention, and battery safety measures.
Identifies and describes the controls and indicators on the front panel of the Rad-57.
Details the rear panel components and the procedure for installing batteries.
Guides through the initial setup process, including battery installation and frequency configuration.
Outlines the general setup and initial steps for operating the Rad-57.
Provides practices for successful SpO2 monitoring and proper sensor application.
Explains sensitivity settings and actions for different monitoring conditions.
Details battery level indicators and low battery audible alarm behavior.
Describes front panel controls and menu navigation procedures.
Covers alarm volume, silence, and alarm limit settings.
Describes how alarms are indicated and the configurable alarm limits.
Provides a chart for common problems like no power, speaker issues, and button failures.
Addresses issues with SpO2 correlation, unexpected readings, and no readings.
General| Brand | Masimo SET |
|---|---|
| Model | Rainbow SET Rad-57 |
| Category | Medical Equipment |
| Language | English |
To Next Page
