226 Matrix SATATYA Devices Manual
Auto Add Camera
1. Auto Add camera feature is supported in all the SATATYA Devices.
2. The features is configurable using Device Client and Local Client both.
Auto add camera feature allows the user to add the cameras in the Device via camera initiation. In this, camera
initiates communication with the device client to get added into the device.
Click on the Auto Add Camera option and following pop-up will appear.
The pop-up window contains the list of the cameras in pending state.
The list of the camera appears only if the Auto Add Camera option is disabled from Basic Settings page.
See “Auto Add Camera” on page 211.
You need to select the camera(s) and click on Add button to activate the camera. Click Reject to remove the
camera from the pending list.