Matrix simado gfx11 System Manual

Matrix
SIMADO GFX11 System Manual
33
‘95’ is present in both. So, the SIMADO GFX11 will replace this sub-
string with the number string programmed in the corresponding row
in the Substitute-String column. Hence, the number dialed out would
be ‘+912668263172’.
How to program?
Step 1: Program the Dialed String/Substring using command 291.
Step 2: Program the Substitute String using command 292.
Step 3: Clear the table using command 290.
Step 1
Use the following command to program the dialed string/substring:
291-Number Index-Dialed String/Substring-#*
Where,
Number Index is from 1 to 8.
Dialed String/Substring is of maximum 8 digits.
The digits allowed are 0-9.
By default, all the dialed string/substrings are NULL (empty).
Use the following command to clear the dialed string/substring at a
given number index:
291-Number Index-#*
Step 2
Use the following command to program the substitute string:
292-Number Index-Substitute String-#*
Where,
Number Index is from 1 to 8.
Substitute String is of maximum 8 digits.
The digits allowed are 0-9, #.
By default, all the Substitute Strings are NULL (empty).
Use the following command to clear the substitute string at a given
number index:
292-Number Index-#*
Step 3
Use the following command to clear all the entries of the automatic
number translation table:

Matrix simado gfx11 Specifications

General

Brand	Matrix
Model	simado gfx11
Category	Gateway
Language	English