Matrix
SIMADO GFX11 System Manual
51
• When SIM is invalid (Only few Emergency numbers are
allowed. This depends on the GSM Engine).
• When SIM is blocked.
• When wrong SIM PIN is entered.
For example, for a specific GSM Engine and a SIM Card from a
Service Provider, following sequence is followed to dial an
Emergency Number:
• It will first search for emergency call number stored in the SIM
phone book. If there is at least one emergency number in the
SIM, it will search for the number. If does not match, it will
search for 112 or 911.
• If SIM does not have any emergency number stored it will search
for the number in the default emergency number list stored in the
firmware which are 000, 08, 112, 110, 911, 999.
• If the SIM is invalid means either PUK1 Blocked or PUK2
Blocked or No SIM, it will search for emergency numbers, which
are 000, 08, 112, 110, 911, 999, 118 and 119.
• If SIM is blocked means either PIN1 Blocked (PUK1 Requested)
or PIN2 Blocked (PUK2 requested) valid emergency numbers are
000, 08, 112, 110, 911, 999.
• If SIM is not inserted 000, 08, 112, 110, 911, 999, 118 and 119 are
considered as emergency numbers.
• If wrong PIN is entered 000, 08, 112, 110, 911, 999 are
considered as emergency numbers.
How to program?
Use the following command to program the emergency number in
the table:
151-Index-Emergency Number-#*
Where,
Index is from 1 to 4.
Emergency Number is 4 digits maximum.
Use the following command to clear the emergency number at an
index:
151-Index-#*
To Next Page
Loading...
Need help?
General
