8
Instrument Overview
3. Stacker Unit
Stacker base unit: Attaches to the standard WellMate
unit to accommodate stacker chimneys. Used in
conjunction with the WellMate instrument to automate the
liquid dispensing and plate handling process.
Optical plate sensors: Allows the stacker unit to run until
the stacker chimney is empty, then stops the run.
Stacker chimneys: Tall chimneys accommodate up to
50 standard height plates, short chimneys accommodate
up to 25 standard height plates. Both will accommodate
shallow plates, deep well plates, blocks or tube racks up
to 3.5 in or 89 mm. Interchangeable with the PlateMate
®
Plus system.
Built in waste reservoir: Drains waste fl uid.
To Next Page
Loading...