29
Setting up and running the Instrument
®
3. Program Lock Feature Instructions
1. Follow the steps above for creating the program.
2. Save and lock the program.
a. Press MODE. The memory LED lights up.
b. Press the up or down arrow to move to the
program number you want to save the program
to. If the 96 LED is illuminated, program numbers
1-9 appear, one at a time in the display. If the 384
LED is illuminated, numbers 11-19 appear in the
display.
c. When the program number you want to use
appears in the display, press SELECT. “LoAd”
appears on the display.
d. Press SELECT again. “save” appears on the
display.
e. Press START. PASS will appear on the display.
f. Press the PRIME button. “----“ will appear on the
display. Press the UP or DOWN arrow to input the
4-digit password. (“0000” is not accepted) press
the PRIME button to select the number for each
digit.
g. Once the 4-digit password is set, press START to
lock the program with the password. The program
is now locked.
3. To run a locked program:
a. Select program number.
1. Press MODE until the memory LED is
illuminated.
2. Use the UP or DOWN arrows to select the
desired program number.
To Next Page
Loading...