Matrix WellMate - Install Stackers (Optional)

21
Confi guring the Device
®
5. Install Stacker Base Unit (optional)
Note: The WellMate unit requires EPROM chip version
3.11 or higher. Contact your Matrix representative to install
the EPROM chip.
Use the following procedure to install the WellMate
Stacker Base Unit.
1. Remove the plate stage and fl uid reservoir from the
WellMate Dispenser.
2. Place the WellMate instrument onto the stacker
base unit in the space provided. The four rubber feet
on the bottom of the WellMate instrument should be
placed in the 4 holes of the stacker platform. See the
following fi gure.
Location for rubber feet of
WellMate instrument