51
Appendices
®
2. Chemical Compatibility
The following chemicals have been tested and approved
for use with the WellMate tubing cartridges. Please be
advised that some of these chemicals may damage
the WellMate housing, base plate, or stage, and to use
caution when using these chemicals. If you have questions
about the use of any chemicals with your WellMate
instrument, please contact your equipment provider.
Table 4. Chemical Compatibility
Chemical Conc. Temp. (° C) Result
Acetone —
20 ▀
56 ▀
Benzyl alcohol —
20 ▀
100 ▀
Chloroform — 20 ▲
Diacetone alcohol —
20 ▀
168 ▀
Dimethyl formamide — 100 ▀
DMSO 100% 20 ▀
Acetic acid, conc —
20 ▀
100
●
NOTES:
▀ = No limit to use of tubing under these conditions.
▲ = Tubing can only be used in a limited range of applications, with
that range partly depending on type of stress tubing is subjected to.
There are pronounced differences in usability depending on whether
exposure to the chemical is temporary or permanent and whether
tubing is completely immersed in the medium or has only partial
contact with it.
● = The tubing should not be used under these conditions.
To Next Page
Loading...