11
Instrument Overview
®
Table 5. WellMate Stacker Unit Specifi cations
(item no. 201-20001)
*Allow at least 2 inches clearance if unit is placed in a containment hood.
Description
Stacker base unit with plate sensors and
built-in waste reservoir; two chimney sizes
available, 50 or 25 plates (501-30005 or 501-
30006)
Power Supply
Input Voltage 100V AC or 240V AC
Consumption 50/60 Hz -40VA
Measurements
Width 31.06 in (78.89 cm)
Depth 12.65 in (32.13 cm)
Height with Tall Stackers = 40 in (101.6 cm)*
Height with Short Stackers = 28 in (71.12 cm)*
Weight 60 lbs (27.22 kg)
Plate Type
96 and 384-well plates; shallow and deep well
Capacity: 25 standard-height plates
50 standard-height plates
To Next Page
Loading...