Max Bepop CPM-200G User Manual

5
Product Specications
ProductSpecications
Product CPM-200G
Printer section
Printing method Thermal transfer
Printing density 300dpi
Printing speed 1.0”/sec. (25mm/sec.)
Cutter section
Resolution 0.001”/step (0.025mm/step)
Cutting speed 4.7”/sec. max (120mm/sec. max) (axial direction)
Maximum output range 8” × 78.7” (200 × 2,000mm)
Interface
USB2.0
LAN 100baseTX
Working environment
Temperature 50 - 80°F(10 - 27°C) (77°F(25°C) recommended for
process color)
Humidity: 35 - 70 % (No dew condensation allowed)
Power input AC 100 - 240 V 50/60 Hz
Rated current 2A
Outer dimensions
13.8” × 12.4” × 12.4” (425mm × 315mm × 315mm)
(W) × (D) × (H)
Mass (Main body only) 34.2lbs (15.5 kg)
* Design, specications, and the like are subject to change without notice.
FCCCAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.

Max Bepop CPM-200G Specifications

General

Brand	Max
Model	Bepop CPM-200G
Category	Label Maker
Language	English