To Next Page
K
keithbensonSep 23, 2025
What to do if virus software is running while using Max Bepop CPM-200G?
- VVincent MartinSep 23, 2025
If it is running, close it.
What to do if virus software is running while using Max Bepop CPM-200G?
If it is running, close it.
What to do if Max Bepop CPM-200G says there is no tape?
If there is no tape, set new tape in the main body. If the data was being printed, click on the “Cancel Print” button and redo printing.
What to do if my Max Bepop CPM-200G has a tape feed error?
If a tape feed error is occurring, after canceling the print using the status monitor, restart the printer, insert Max Brand tape rolls. The correct sheet should have a N on the end of the product name.
What to do if Max Label Maker says there is no ribbon?
If there is no ribbon, set new ribbon in the main body. If the data was being printed, click on the “Cancel Print” button and redo printing.
What to do if my Max Bepop CPM-200G cannot detect the leading end of the tape?
If the Max Label Maker cannot detect the leading end of the tape, view help by pressing the [Remedy] button, take a correct measurement of the tape. If the data was being printed, click on the “Cancel Print" button and redo printing.
What to do if the remaining ribbon length is running out on Max Bepop CPM-200G Label Maker?
If the remaining ribbon length is running out (2 m or shorter), use a ribbon that is used in your layout, and has enough remaining length to print.
What to do if the ribbon has not been loaded or a non-special ribbon has been loaded in Max Bepop CPM-200G?
If the ribbon has not been loaded or a non-special ribbon has been loaded, correctly insert the specialized ink ribbon.
What to do if there is no print data corresponding to the set ribbon color on Max Bepop CPM-200G?
If there is no print data corresponding to the set ribbon color, please use the ink ribbon that is used in your layout.
What to do if there is no valid print data within the printable area on my Max Bepop CPM-200G?
If there is no valid print data within the printable area, make object that fit inside the printable area, or set the process color to something besides white.
What to do if my Max Bepop CPM-200G receives faulty data from the PC?
If the main body has received faulty data from the PC, after cancelling the print using the status monitor, check that the printer model type is correct, restart the printer, and reprint the layout.
Details critical safety warnings and guidelines for operating the machine.
Step-by-step instructions for loading tape into the machine.
Guide on how to install the ribbon cartridge.
Instructions for replacing the ribbon within the cartridge.
Procedure for installing or replacing the cutting blade.
How to adjust the blade pressure for optimal cutting.
Detailed steps for installing the printer driver.
Instructions for installing the driver via USB connection.
Instructions for installing the driver via LAN connection.
Troubleshoots issues encountered during the printing process.
Details critical safety warnings and guidelines for operating the machine.
Step-by-step instructions for loading tape into the machine.
Guide on how to install the ribbon cartridge.
Instructions for replacing the ribbon within the cartridge.
Procedure for installing or replacing the cutting blade.
How to adjust the blade pressure for optimal cutting.
Detailed steps for installing the printer driver.
Instructions for installing the driver via USB connection.
Instructions for installing the driver via LAN connection.
Troubleshoots issues encountered during the printing process.
General| Print Method | Thermal transfer |
|---|---|
| Max. Print Width | 100 mm |
| Connectivity | USB |
| Media Type | Continuous tape, die-cut labels |
| Cutter | Automatic |
| Power Supply | AC adapter |
| Battery Life | Not applicable |
| Max Label Length | 2000 mm |
