To Next Page
O
olsonronnieSep 10, 2025
What to do if the ink ribbon is running out in Max Label Maker?
- JjcollinsSep 10, 2025
If the ink ribbon is running out (2 m or less), please prepare a ribbon with enough length to print.
What to do if the ink ribbon is running out in Max Label Maker?
If the ink ribbon is running out (2 m or less), please prepare a ribbon with enough length to print.
What to do if there is no remaining ribbon in Max Label Maker?
If there is no remaining ribbon, insert an ink ribbon with enough remaining length.
What to do if Max Bepop CPM-200G Label Maker is unable to get the necessary ink ribbon information?
If you are unable to get the necessary ink ribbon information, open the door cover, and check that the ink ribbon is properly inserted.
What to do if the Max Label Maker door cover is open?
If the door cover of the main body is open, close it. If the data was being printed, click on the “Cancel Print" button and redo printing.
What to do if there is a communication error on Max Bepop CPM-200G?
If a communication error is going on, re-install the printer driver, and restart your PC.
What to do if there is no valid print data within the printable area on my Max Bepop CPM-200G?
If there is no valid print data within the printable area, make object that fit inside the printable area, or set the process color to something besides white.
What to do if the data volume received from the PC by the main body has exceeded the maximum capacity on Max Label Maker?
If the data volume received from the PC by the main body has exceeded the maximum capacity, check the layout and decrease the number of objects.
What to do if my Max Bepop CPM-200G receives faulty data from the PC?
If the main body has received faulty data from the PC, after cancelling the print using the status monitor, check that the printer model type is correct, restart the printer, and reprint the layout.
What to do if the temperature of the printer head is lower than the specified value in Max Label Maker?
If the temperature of the printer head is lower than the specified value, after canceling the print using the status monitor, increase the temperature of the thermal head (after the indoor temperature has warmed up), restart the machine, and please reprint the layout.
What to do if the temperature of the printer head is higher than the specified value in Max Bepop CPM-200G Label Maker?
If the temperature of the printer head is higher than the specified value, after canceling the print using the status monitor, decrease the temperature of the thermal head, restart the machine, and please try to reprint.
Details critical safety warnings and guidelines for operating the machine.
Step-by-step instructions for loading tape into the machine.
Guide on how to install the ribbon cartridge.
Instructions for replacing the ribbon within the cartridge.
Procedure for installing or replacing the cutting blade.
How to adjust the blade pressure for optimal cutting.
Detailed steps for installing the printer driver.
Instructions for installing the driver via USB connection.
Instructions for installing the driver via LAN connection.
Troubleshoots issues encountered during the printing process.
General| Print Method | Thermal transfer |
|---|---|
| Max. Print Width | 100 mm |
| Connectivity | USB |
| Media Type | Continuous tape, die-cut labels |
| Cutter | Automatic |
| Power Supply | AC adapter |
| Battery Life | Not applicable |
| Max Label Length | 2000 mm |
