Max Bepop CPM-200G - Errors Related to Environment, Repair, and Communication

34
BepopPC EX Software Installation
Error
Code
Error Message
Printer LED
Status
Solution Reference
Errors related to environment
500
The printer is now in operation. Green Please print after the printer is nished.
ー
501
The temperature of the printer head is higher than
the specied value.
Red
After canceling the print using the status monitor,
decrease the temperature of the thermal head,
restart the machine, and please try to reprint.
ー
502
The temperature of the printer head is lower than the
specied value.
Red
After canceling the print using the status monitor,
increase the temperature of the thermal head (after
the indoor temperature has warmed up), restart the
machine, and please reprint the layout.
ー
503
The main body has received faulty data from the
PC.
Red
After cancelling the print using the status monitor,
check that the printer model type is correct, restart
the printer, and reprint the layout.
ー
504
The data volume received from the PC by the main
body has exceeded the maximum capacity.
Red
Check the layout and decrease the number of
objects.
ー
505
There is no valid print data within the printable area. Green
Make object that t inside the printable area, or set
the process color to something besides white.
Pg. 22
510
CommandSizeError Green Check the layout and decrease the number of objects.
ー
Repairs Required
600
The printer head is faulty.
Red
+
Green
After canceling the print on the status monitor,
restart the printer. If the problem does not go away,
machine repairs are necessary. Please consult your
dealer or a service station representative.
Pg. 6
601
Failed to detect the cutter origin.
602
Failed to operate the scissors successfully.
603
Failed to operate the head unit successfully.
Communication
900
A communication error is going on.
None
Check that the USB/LAN/power cords are securely
attached. Also check the IP address, and that time
out settings have not changed.
Pg. 13
Pg. 20
Pg. 21
901
A communication error is going on.
902
A communication error is going on.
903
A communication error is going on. Re-install the printer driver, and restart your PC.
Pg. 15