Max Bepop CPM-200G User Manual

6
Before Use
BeforeUse
PackageContents
Open the package and conrm that all of the following items are included.
(1) CPM-200 (2) Power Cord (3)

Cutting Tool (Blade)
(1 pc.)
(4)

Weeding Tool (5) Squeegee
(6)

Blade Holder
(Attached upon
shipment)
(7)

Blade Holder
Replacing Spanner
(8)

PC Software
(CD-ROM)
(9)

Operation Manual
(this manual)
ComponentNames
[FrontofMainBody] [BackofMainBody]
Door Cover
Tape Outlet
LED Lamp
Cutting Pressure Control Dial
Scissors Button
Tape Reverse Button
Tape Feed Button
Power Button
USB Connector
Front bar
Opening/Closing Lever
Print Head
Blade Holder
Cutting Head
Tape Retainer
Sprocket Pins
Power Connector
Tape Holder
[Consumables]
MainKeyFunctions
Powerbutton
: Used to turn on/off the power.
LEDlamp
: Illuminated in green when the power is turned on.
It is illuminated or blinks in red when informing you of an error.
(For details on errors, see the status monitor information displayed on the PC screen.)
Tapefeedbutton
: Tape is fed while the button is held down.
Tapereversebutton
: Tape is reverse-fed while the button is held down.
Scissorsbutton
: Used to fully cut the tape.
Tape Roll
Ribbon Rell
Rellable Ribbon
Cartridge
Hinges
Ribbon Gears (4 pcs.)
Hinges
Sprocket Holes

Max Bepop CPM-200G Specifications

General

Brand	Max
Model	Bepop CPM-200G
Category	Label Maker
Language	English