Maxcess Fife Polaris DP-20 User Manual

DP-20 WEB GUIDE CONTROLLER USER MANUAL
www.maxcessintl.com
DP-20
MI 1-862 1 F
6
6-20
3X.2.8, LCD Contrast
1. Press the SETUP key to enter the Setup Menus.
The SELECT MENU screen will be displayed on
the LCD Panel.
2. Use the ARROW keys to scroll until SPECIAL is
displayed on line 4.
3. Press the ENTER key to enter the Special
Menus. The DEADBAND menu will be
displayed.
4. Use the ARROW keys to scroll until LCD
CONTRAST is displayed on line 3.
5. Press the ENTER key to enter the LCD
CONTRAST menu.
6. Use the ARROW keys to adjust the contrast
from 0% (lightest contrast) to 100% (darkest
contrast).
7. Press the ENTER key to store the change or
press the MANUAL key to abort the procedure.
The system will exit the setup menus, and
return to the Operator Level.
Resetting the LCD CONTRAST to the default
The LCD CONTRAST factory default setting is 50%. If a previous contrast setting has left the
display in an unreadable state, you can easily reset it to the default: Press and hold the
SENSOR and ENTER keys while cycling the power (or during a power up).
× 3A.2.1
SETUP (MAN)
DEADBAND
-ÜÜÜÜÜÜÜ+ 0.0%
× 3A.2.8.1
SETUP (MAN)
LCD CONTRAST
ãããããÜÜÜÜÜ 50%
3A
MANUAL
× -ãããããáÜÜÜÜ+
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.2
SETUP (MAN)
SELECT MENU
SPECIAL
× 3A.2.8
SETUP (MAN)
LCD CONTRAST
ãããããÜÜÜÜÜ 50%

Maxcess Fife Polaris DP-20 Specifications

General

Brand	Maxcess
Model	Fife Polaris DP-20
Category	Controller
Language	English