11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
4
SUMMARY OF CHANGES: M-16-33, REVISION C
PAGE DESCRIPTION OF CHANGE
Cover
Updated revison, date & copyright statement. Liftgate has hydraulic lock valve on the
hydraulic cylinder, and safety hook is no longer part of the extension plate. Added
model info for TE-15 & TE-20.
5 Added California Propositon 65 warning.
8
Replaced ground cable in Parts Box A with a longer ground cable. Removed fl at
washer listing from Parts Box B.
9-10,67-69
Added new UP/DOWN decals for control switch, OPERATING INSTRUCTIONS decal
with QR code, parts portal decal with QR code, and MAXON 24/7 support decal. QR
codes are linked to operation manuals or videos on the MAXON website, and parts
explosions on the MAXON Parts Portal.
11,12,13 Added vehicle requirement info for TE-15 & TE-20.
16 Added center of mass info vehicle for TE-15 & TE-20.
17 Noted TE-15 & TE-20 are equipped with same extension plates as TE-25 & TE-30.
17-19,22-23 Latest extension plates are not equipped with safety hooks.
29-31 Added welding instructions for TE-15 & TE-20 mounting plates in STEP 2.
38 Corrected CHARGE LINE callout.
43
Removed ground cable terminal lug from pump mounting bracket and added a drip
loop to the ground cable.
45,68-69,
72-77
Added lock valve to hydraulic cylinders shown in illustrations and system diagrams.
48 Illustration clarifi es the correct level of hydraulic oil in the pump reservoirs.
56 Added platform opener adjustment data for TE-15 & TE-20.
63-66 Added instructions in STEP 14 for bolting on steps.
78 Cycle counter operating voltage is updated.
79-82 Added digital cycle counter, and dual steps for low bed models, to options tables.
83 Added PRE-DELIVERY INSPECTION form.
To Next Page
Loading...
