11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
23
EXTENSION
PLATE
BRACKET
(2 PLACES)
BOLTING ON INSTALLATION BRACKETS
FIG. 23-1
CAP SCREW
1/2”-13 X 1-1/2” LG.
(2 PLACES)
HEX NUT
1/2”-13
(2 PLACES)
Bolt 2 installation brackets (parts box items) on the
extension plate as shown in FIG. 23-1. Tighten hex
nuts securely.
NOTE: During installation of liftgate, installation brackets keep the heel of the
platform level with extension plate and maintain a ¾” gap between ex-
tension plate and heel of platform. The extension plate has bolt holes for
bolting on the installation brackets provided in parts box.
BOLT INSTALLATION BRACKETS TO EXTENSION PLATE
STEP 1 - INSTALL EXTENSION PLATES - Continued
To Next Page
Loading...
