11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
55
2. Position platform opener on bracket
(FIG. 55-1). Then, bolt opener to
bracket in 2 places at holes A and
C, or holes B and C (FIG. 55-1).
Refer to TABLE 56-1 to select the
correct mounting holes based on
liftgate model, platform size, plat-
form type, and vehicle bed height.
1. Start with platform unfolded
at ground level (FIG. 55-1).
STEP 11 - BOLT PLATFORM OPENER TO LIFTGATE
BOLTING PLATFORM OPENER (TE-SERIES)
FIG. 55-1
PLATFORM
OPENER
LOCK NUT
1/2”-20
CAP SCREW
1/2”-20 X 3/1/2” LG
MAIN FRAME
BRACKET WITH 3
HOLES TO POSITION
OPENER
PLATFORM
OPENER
OPENER WITH 10 HOLES TO
POSITION & BOLT TO BRACKET
(REFER TO TABLE 56-1)
1 2 3 4 5 6 7 8 9 10
A
B
C
FLAT WASHER,
1/2”
To Next Page
Loading...
