11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
54
8. Ensure top surface of platform and
extension plate are fl ush at the
RH and LH sides of platform (FIG.
54-1). The allowable difference
in height is +/- 1/8” maximum as
shown.
SURFACES FLUSH
EXTENSION
PLATE
PLATFORM
MAXIMUM DIFFERENCE IN HEIGHT FOR TOP OF
PLATFORM & EXTENSION PLATE (RH VIEW)
FIG. 54-1
NOTE: Correct any fi t and interference problems before continuing with installation.
+/- 1/8” (MAX)
STEP 10 - REMOVE LOCKING ANGLE AND CHECK FOR
INTERFERENCE - Continued
To Next Page
Loading...
