11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
53
7. Raise platform to bed height (FIG. 53-1).
There should be a 5/8” gap between the
heel of platform and the extension plate
(FIG. 53-1).
NOTE: Correct any fi t and interference problems before continuing with installation.
PLATFORM AT BED LEVEL WITH 5/8” GAP
BETWEEN HEEL & EXTENSION PLATE
FIG. 53-1
PLATFORM
HEEL
EXTENSION
PLATE
5/8” +/-1/8”
GAP
STEP 10 - REMOVE LOCKING ANGLE AND CHECK FOR
INTERFERENCE - Continued
To Next Page
Loading...
