11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
7
TE-SERIES LIFTGATE COMPONENTS
LIFTGATE COMPONENTS
FIG. 7-1
BOLT-ON EXTENSION PLATE
(GALVANIZED OR PAINTED) OR
WELD-ON EXTENSION PLATE (PAINTED)
OPENER
PARTS BOX B
NOTE: Make sure you have all components and parts before you start installing Lift-
gate. Compare parts in the part box and each kit box with packing list closed
in each box. If parts and components are missing or incorrect, call:
Maxon Customer Service
Call (800) 227-4116 or
Send e-mail to customersupport@maxonlift.com
Prevent injuries and equipment damage. Before cutting the shipping straps
from the Liftgate, put Liftgate on level ground that will support at least 1500
pounds. Be careful lifting and moving components (such as extension plate)
after shipping straps are removed.
CAUTION
!
BOLT-ON STEP
(GALVANIZED
OR PAINTED)
BOLT-ON STEP
(GALVANIZED
OR PAINTED)
PARTS BOX A OR C
To Next Page
Loading...
