5.3.3.7 Advanced
Click Advance to unfold its sub-options: Firmware Update, Load default, Events and
Maintain.
1. Firmware Update
User may remotely update NVR system, as shown in Picture 5-27.
Picture 5-27
Updating procedure：
Firstly, select the update file path. The file format is .sw. Please refer to Picture 5-28.
Picture 5-28
Secondly, click “Start” to start updating. The updating progress can be seen on the screen,
as shown in Picture 5-29.
Picture 5-29
To Next Page
Loading...