MBO RW500 - Duties of the Operator

Rewinder RW500
29
Basic safety instructions
Personnel, qualification and duties
2.10.2 Duties of the operator
The owner/operator is responsible for
• the machine being operated only as intended,
• the machine being operated only when it is fully functional, safe and re-
liable,
• the machine being maintained and cleaned according to the specifica-
tions in the maintenance and cleaning schedule,
• the machine is protected against unauthorized use,
• the necessary personal protective equipment being available,
• the necessary personal protective equipment being worn,
• only authorized personnel having access to the machine,
• the authorized personnel being adequately qualified,
• the authorized personnel being instructed in all applicable questions of
workplace safety, accident prevention, and environmental protection,
• the authorized personnel has read and understood the operating man-
ual,
• the operating manual is always kept where the machine is used and it
is freely accessible to the operating and maintenance personnel,
• the safety and safety signs on the machine are kept in an easily legible
condition,
• a risk assessment of the entire machine system being carried out and
its results being summarized in an operator directive,
• identified defects or abnormal operating states/malfunctions being rem-
edied immediately,
• operation of the machine being ceased during troubleshooting.
Heed the national laws and European directives about occupational safety
and health of employees at work.
Germany The requirements of the German Labor Protection Act (ArbSchG) and the
German Health and Safety at Work Regulations (BetrSichV) must be
adhered to.
EC countries The requirements of the directives 89/391/EEC and 2009/104/EU must be
adhered to.