Attaching the backrest padding
Hook the top of the backrest padding over the top and shoulders of the metal
backrest. Tuck the lower half of the padding under the backrest.
Attaching the backrest side padding
Slide the backrest side padding over the metal backrest laterals. Secure the
padding with the Velcro attached to the padding and the metal backrest.
Attaching the Occipital Headrest
Attach the Velcro at the back of the occipital headrest to the backrest padding.
Adjusting the headrest
If the headrest pushes the user’s head forward, you can remove the ‘LEAF’ of
foam from the headrest.
To do this, un-zip the upholstery cover and remove the foam inner.
Tear o the leaf and slip the cover back on. Finally, zip the cover closed.
Assembling the Discovery Seat
To Next Page
Loading...