Need help?Do you have a question about the Medifab Shuttle Discovery and is the answer not in the manual?
General| Brand | Medifab |
|---|---|
| Model | Shuttle Discovery |
| Category | Baby & Toddler Furniture |
| Language | English |
Introduction to the Shuttle Discovery system and manual.
Specifies the product's purpose and indications for use.
Details product compliance with European safety standards and ISO.
Details the product's warranty terms and conditions.
Important initial steps and guidelines before using the product.
Specifies maximum weight capacities for the stroller and seat.
Guidelines for proper operation and surface use.
Instructions on using approved parts and periodic reviews.
Essential pre-use checks for security and functionality.
Safe practices for transfers, securing the user, and operation.
Guidance on maneuvering over curbs, steps, and other obstacles.
Factors affecting stability and preventing tip-overs.
Proper use and safety of seat components and accessories.
Requirements for regular cleaning and checks.
Guidelines for securing the product in vehicles and safety considerations.
General safety advice regarding heat, water, folding, and unattended use.
Steps for unpacking and checking stroller components.
How to unfold the stroller frame and push handle.
Securing the stroller frame in its open position.
Attaching the rear wheels to the stroller frame.
Attaching the front wheels to the stroller frame.
Steps for unpacking and checking seat components.
Instructions for attaching the backrest to the seat depth bracket.
How to secure the hip supports to the seat depth bracket.
How to attach the thoracic support brackets and pads.
Attaching padding to the footplate.
Securing the seat padding.
How to attach the main backrest padding.
How to attach the side padding to the backrest.
Attaching the headrest to the backrest padding.
How to adjust or modify the headrest foam for comfort.
Adjusting the seat depth using screws and bracket.
Adjusting hip guide width, depth, and angle.
Adjusting the backrest angle and locking mechanism.
Importance of upright backrest for transport.
Securing the backrest in an upright position.
Adjusting the height of the backrest.
Adjusting the height of the footplate.
Adjusting the angle of the footplate.
Adjusting the width, depth, and angle of thoracic supports.
Operating the tilt-in-space mechanism to adjust seat angle.
Returning the seat to an upright position.
Securing the seat tilt in the desired position.
How to lock and unlock the front wheels.
Engaging and disengaging the parking brake.
Steps to fold the stroller frame.
Instructions for installing the seat facing forward.
Instructions for installing the seat facing backward.
Steps to detach the seat from the stroller.
Steps for storing the stroller and seat compactly.
Adjusting the footplate angle for storage.
Detaching the footplate mechanism for compact storage.
General warnings related to vehicle transport, restraints, and loading.
Guidelines on using approved tie-down systems and restraint angles.
Installing front securement brackets.
Installing rear securement brackets.
Locking the backrest in an upright position for transport.
Locking the seat tilt for safe transport.
How to attach and adjust shoulder straps.
How to attach the crotch strap.
How to fit the pelvic strap using slots and buckles.
Adjusting the length of the pelvic straps.
Buckling and unbuckling the pelvic strap.
How to secure the 5-point harness buckle.
Fitting the Tee-Pad harness for infants.
Fitting the Centrepoint harness for infants.
How to fit the jacket or sternum harness.
Adjusting the length of the harness straps.
Buckling and unbuckling the jacket harness.
Attaching the brackets for the 4-point pelvic strap.
Fitting and adjusting the pelvic and thigh straps.
Installing the mounting bracket for abduction support.
Attaching the abduction support to the bracket.
Attaching brackets for the hip guides.
Detaching and re-securing hip guides.
Adjusting hip guide width, depth, and angle.
Attaching adduction support brackets and positioning them.
Adjusting the position of the adduction supports.
Securing headrests to the backrest.
Adjusting the position of the headrest sides.
Mounting bracket installation for IV pole and oxygen holder.
Mounting the IV pole assembly to the bracket.
Mounting the oxygen bottle holder to the bracket.
Mounting both accessories together to the bracket.
Placing and securing the thigh wedge on the seat pan.
Placing and securing trochanter wedges on the seat pan.
Securing shoulder protraction wedges at the top of the backrest.
Securing the sacral pad at the bottom of the backrest.
Steps and measurements for configuring the modular cushion.
Positioning trochanter wedges for stability and correction.
Adding adduction/abduction wedges as needed for support.
Installing foam overlay and covers onto the cushion.
Attaching the configured cushion to the seat frame.
Replacing hip pad fasteners for thicker cushion compatibility.
Securing the tray mounting bracket to the footrest hinge bracket.
Assembling the tray height adjustment legs and components.
Adjusting the height of the tray using the stop and knob.
Adjusting the depth of the tray using wing knobs.
Adjusting the angle of the tray using wing knobs.
Attaching the grab bar to the tray table lip.
Adjusting the position of the grab bar for the user.
Installing and removing the Critical Care Basket Insert.
Attaching toe and ankle straps to the footplate.
Fitting the padded footplate cover with Velcro.
Fitting the footplate dorsiflexion wedge with slope.
Attaching the sunhood mounting brackets to the backrest.
Mounting the sunhood clip onto the bracket.
Detaching the sunhood from the mounting clip.
Positioning and attaching the snuggle warmer to the seat.
Attaching the seat to the Moon Rock Base.
Engaging the anti-rock bars for stability.
Disengaging the anti-rock bars.
Detaching the seat from the Moon Rock Base.
Attaching the seat to the Launcher Base.
Adjusting the seat height on the Launcher Base.
Detaching the seat from the Launcher Base.
Unfolding and adjusting the A-Frame Launcher Base.
Attaching the seat to the Lunar Base.
Adjusting the seat height on the Lunar Base.
Detaching the seat from the Lunar Base.
Fitting and attaching the rain/UV cover.
Warnings and installation of the sibling seat.
Adjusting the backrest angle.
Cleaning instructions for upholstery and fabric components.
Cleaning instructions for metal, plastic, and wooden parts.
Procedures for reissuing the product to a new user.
Daily checks to perform before each use of the product.
Scheduled six-monthly checks for the Discovery Seat and bases.
Six-monthly checks for the Verve Stroller.
Six-monthly checks for the Launcher Base.
Six-monthly checks for the Moon Rock Base.
Six-monthly checks for the Lunar Base.
Information on locating serial numbers for product identification.
List of materials used in the product's construction.
Technical specifications for the main product.
Technical specifications for the Launcher Base.
Technical specifications for the Lunar Base.
Technical specifications for the Moon Rock Base.
To Next Page