Medifab Shuttle Discovery - Maintenance Checks; Verve Stroller; Launcher Base; Moon Rock Base

To Next Page

To Previous Page

Verve Stroller

1. Check the stroller is moving smoothly and functioning correctly. Any unusual

noise or vibration or movement in the product could be caused by loose

fasteners or damage to the product. Contact your Shuttle Discovery distributor,

health care provider or Medifab who will assist you to correct any problems.

2. Do not use the product until the problem is rectied.

3. Check the rear wheels are locking securely. Remove any dirt and ensure the

wheels are turning freely.

4. Check the front wheel / wheels swivel lock is working correctly

5. Check the fasteners that secure the front and the rear seat mounting bars are

tight.

6. Check the overall Stroller structure for any signs of fatigue or damage.

Check the frame for wear and tear, splinters or breaks.

Launcher Base

1. Check the caster brakes lock. Ensure the casters are free from dirt and freely

turning.

2. Check casters are rmly secured to the base board.

3. Check there is no play in the two wooden sides. Check the six screws under the

base board are tight.

4. Check height adjustable seat mounting is tight.

5. Check the overall Launcher Base structure for any signs of fatigue or damage.

6. Check the frame for wear and tear, splinters or breaks.

7. Replace any missing or worn fasteners / adjusting levers and knobs.

Moon Rock Base

1. Check the two sides of the Moon Rock Base are tight.

2. The front and rear anti rock mechanism is functioning correctly and rmly

secured to the sides.

3. Check front and rear mounting bars are secure.

4. Check the overall Moon Rock Base structure for any signs of fatigue or damage.

5. Check the frame for wear and tear, splinters or breaks.

6. Replace any missing or worn fasteners / adjusting levers and knobs.

Lunar Base

1. Check the two sides of the Lunar Base are tight.

2. Check each of the four legs are tightly secured to the base and level.

3. Check the overall Lunar Base structure for any signs of fatigue or damage.

4. Check the frame for wear and tear, splinters or breaks.

5. Replace any missing or worn fasteners.

WARNING

If a fault is found with any part of the Shuttle Discovery System, do not use the

product until the fault is rectied. Contact Medifab customer service department

or your local dealer immediately for guidance.

Maintenance: Six-monthly Checks