MediSono P12 - Import;Export Exam Mode; Print

Digital Color Doppler Ultrasound System
134
Basic User Manual
3. Click Up or Down to move the exam mode up or down.
4. Click Save to complete.
 Click Delete to remove the exam mode.
 Click Reset to restore the default exam mode.
 Click Exit to quit the screen.
14.4.3 Import/Export Exam Mode
NOTE:
Customize exam mode (except system exam mode) can be exported.
1. Press the E key on the probe selection screen.
2. Select a probe and the disk.
3. Select an exam type from Local Disk .
4. Perform the following operations.
 Click to export the select exam mode to the USB drive.
 Click to export all exam mode of the selected transducer to the USB
drive.

Click to import a selected exam mode from the USB drive to local
system.

Click to import all exam modes from the USB drive to local system.
5. Click Exit to quit the screen.
14.5 Print
This device supports video/therm al printing, USB printing and DICOM printing. Connection
through proper I/O port is necessary to use the printing function.
Instructions:
 Press to print the current screen using a video printer.
 Press to print the current screen.
NOTE:
Consult the printer user guide for installation and usage instructions.