5.8 Remote Service
Rem ote service helps you to solve the abnormity or malfunction occurred in system upgrade or
usage. You can get assistance from after-sales or technical personnel of t he m anufacturer by
applying it.
To enable remote service,
1.
Connect the ultrasound system to the network by using an Ethernet cable.
2.
Make settings on the
Peripheral
menu to ensure the ultrasound system is successfully
connected to the remote server. For details, refer to Section 5.2 Peripheral.
3.
Click the
Service
tab in the
System Setting
menu to display the following screen.
4.
Click
Start Remote Service
, and the ultrasound system is automatically connected to the
remote server.
A hint pops up if the ultrasound system is connected successfully.
Check the network if the ultrasound system fails to be connected.
You should contact after-sales or technical personnel for assistance after applying rem ote
service.
To Next Page
Loading...
