MediSono P12 - Rotate Image; Zoom; Print; Exit

Digital Color Doppler Ultrasound System
157
Basic User Manual
100.
1. Open the menu, and use the trackball to select Bright .
2. Rotate to adjust the brightness.
Color Map 
Adjust this item to change the color of the image. 5 colors can be selectable: 0, 1, 2, 3, 4.
1. Open the menu, and use the trackball to select Color Map.
2. Rotate to change the value.
Stability 
Adjust this item to enable or disable the function.
1. Open the menu, and use the trackball to select Stability .
2. Rotate to enable or disable the function.
17.2.3 Rotate Image
4D image can be rotated from any angle.
Use the trackball to move the cursor on an area of the 4D image, press to select this
area, and then use the trackball again to rotate the this area from any angle.
17.2.4 Zoom
Zoom in or out the image with the shortcut key.
Use the trackball to move the cursor on an area of the 4D image, press to select this
area, and then use the trackball to zoom out or zoom in the image.
17.2.5 Print
After connecting the system to the printer, press to print a current screen shoot.
17.2.6 Exit
In the 4D real-time mode,
 Press to exit the real-time 4D mode and return to the frozen 4D mode.
 Press to exit 4D real-time mode and return to B mode.