MediSono P12 - Page 74

63
Basic User Manual
Digital Color Doppler Ultrasound System
cleared in the real time m ode aft er you perform
the measurement in the frozen mode.
If it is set to Off , all measurement results
cannot be cleared in the real time mode after
you perform the measurement in the frozen
mode.
Auto trace on cine playback status
If it is set to On , an auto t race appears and the
system automatically measures and calculates
it when you manually review the cine in the
frozen PW/CW mode.
If it is set to Off , no auto trace appears and the
system cannot automatically measures and
calculates it.
Measure Results Font Size
Set it from 12-20.
Show OB Age
If it is set to On , OB age will be calc ulated
according to the date of last menstrual period
or tube baby and displayed in the measured
result box.
If it is set to Off , OB age will not be calculated.
Show EDD
If it is set to On , EDD will be calculated
according to the date of last menstrual period
and displayed in the measured result box.
If it is set to Off , EDD will not be calculated.
RUV RATIO
Select the ratio of residual urine measurement
to be used from 0.7 or 0.52.
Follicle Measurement
Select the measurement method to be used
from Double Caliper or Three Caliper
Show SD
If it is set to On , the deviation range between
CUA and EFW will be displayed in the
measured result box and measurement report.
If it is set to Off , the deviation range will not be
displayed.